[SCRIPT] AAC 3.6.4 Teleport + TeleportHit + Clip exploit [V1.93HOTFIX]

Avatar

By Nvaros 26 April 2019 15:44

Member · 23 comments

The following script contains the following bypasses [Latest version: 1.93 [HOTFIX]]:
- AAC 3.6.4 Teleport
- AAC 3.6.4 VClip (works through blocks if you're fully stuck in a block)
- AAC 3.6.4 HClip (works through blocks if you're fully stuck in a block)
- AAC 3.6.4 Fullblock Phase (does not work for hoppers)
- AAC 3.3.13-3.6.4 TeleportHit

IMPORTANT: If you want to fully use the script on b64, you MUST update to the latest version!
Download latest version of this script: https://workupload.com/file/n3u2mQqX
The b64 update has caused the script to be partly broken.

If you want to play with b63, do NOT use the hotfix and click on the link below.
Download for b63: https://workupload.com/file/FYsP7SQL
Video showcase (NeruxVace only, but already tested on several servers [Twerion, BlocksMC, Jartex, Poke, etc.]:


Video showcase 2 (Shows the HClip and Phase exploits; just shown on Poke, but should work on every AAC 3.6.4 server as well):

Notes regarding the teleport (AACTP [Category: Fun]):
- You have to be on the ground while enabling it.
- To teleport to your target location, fly to that position (Freecam will be enabled) and sneak on that certain block
- It does not work through blocks; there must not be any blocks between you and the target position.
- There also must not be any blocks three blocks above you.
- Teleporting upwards and downwards is possible. However you have to either teleport to the very edge of the "target block" (if you teleport upwards) or stand on the very edge of a block (if you teleport downwards). In both cases, do not stand/teleport next to a wall.
- Teleporting upwards 3.5+ blocks will give you damage, teleporting downwards works as a perfect NoFall.
- The teleportation distance has to be higher than 10 blocks.
- Do not untoggle neither the teleport nor the Freecam by your own! The module will do it itself as soon as you try to teleport.

Notes regarding the VClip:
- Correct syntax: .aacvclip <height>
- Works up and down
- Use it to VClip through blocks, do not use Teleport in that case.
- You have to be on ground before trying to VClip.
- The maximum distance is 10 blocks.
- If you're stuck in a block, you can vclip through blocks by using this command.

Notes regarding the HClip:
- Correct syntax: .aachclip <distance>
- Do not move until you're teleported.
- The maximum distance is ~150 blocks
- Does not work through blocks unless you're fully stuck in blocks

Notes regarding the Phase [Category: Fun]:
- Can clip through any 1 block wall (except hoppers)
- If you're stuck in a block, you can phase through thicker walls
- However, abusing it too much in a row will result in an anticheat kick

Notes regarding the click teleport (AACClickTP [Category: Fun]):
- Same notes as for the AACTP module
- Look at your target position and press the middle mouse button.
- After you have been teleported, you have to wait 1 seconds until you can teleport again.

Notes regarding the teleporthit (TPHit [Category: Fun]):
- Same notes as for the AACTP module
- Look at your target entity and press the attack button.
- After you have hit an entity, you have to wait 1.5 seconds before you can use this module again.


Changelogs:

V1.93 [HOTFIX]
- Script has been made fully compatible with  b64 regarding the slightly changed syntax. Download it if you want to use the script with b64.

V1.92
- Small code changes for ClickTP

V.1.91
- [ClickTP] Fixed block raycasting

V1.9
- [ClickTP] Changed block raycasting (blocks without collision box will be ignored; y pos corresponds to collision bounding box)
- [ClickTP]: Added TPFucker mode
ClickTP now has an integrated fucker mode which will try destroy a certain block within the range of the target position.
It works as a perfect TPBreaker for AAC 3.3.13+ servers with bad configs
To use it, select the block that should be destroyed by .tpfucker select <id> (supports numerical and alphabetical ID).
Then simply teleport anywhere close to that block (range <= 4). It works through walls (depends on the AAC config (!)).
It can be disabled by typing in .tpfucker disable and can be reenabled with .tpfucker disable.
By default it is enabled and attacks beds.

V1.8
- [ClickTP] Improved block raycasting (fixed it for pitch angles close to 90°)

V1.73
- Just a minor fix, nothing relevant.

V1.72
- Fixed a bug regarding the TPHit message.

V1.71
- Fixed descriptions and added chat messages to TPHit and AACClickTP.

V1.7
- [Teleport] Freecam settings don't have to be changed by your own anymore (the former ones restored as soon as the module has been disabled)
- AACClickTeleport added; it is the same teleport, but it allows you to teleport by looking at your target position and pressing the middle mouse button.
- TPHit added (Vanilla/AAC 3.3.13-3.6.4); Allows you to hit your enemy with a little delay (can not be prevented) regardless the distance
It does not work through walls though.

V1.6
- Improved teleport and AACHClip (smaller probability to glitch midair); the HClip now works for any distance;
- Module TPScriptInfo added (irrelevant for you, but not for those who got this script from somewhere else than this thread)

V1.5
- A slighty different teleport mode has been added in case that the default one keeps struggling (the second mode still only works for 3.6.4!).
You can select it by using .aactp mode <mode>. Current modes: AAC (default), AAC2

V1.4
- Commands will no longer cause a crash if you don't enter arguments (ty scorp)

V1.3
- Freecam will be disabled if you disable the teleport manually.
- The teleport will be automatically disabled as soon as you take damage. This feature has been added to prevent the game to be unplayable if you die while being in Freecam mode. It can be disabled by using the command .aactp disableondmg false.

V1.2
- Minor changes

V1.1
- HClip added
- AACPhase added
- VClip does no longer require enabling timer by your own

Last edited by Nvaros (1 September 2019 18:05)

Avatar

By CzechHek 26 April 2019 16:31

Member · 314 comments

Finally some quality content, I actually like this a lot.
Amazing smile


ScriptAPI Developer.
Experienced YouTuber.
Discord: v.ht/DYSKORD
YouTube: v.ht/CzechHek

Avatar

By Elelrxi 26 April 2019 16:37

Member · 229 comments

now this is epic axoheart

Avatar

By yorik100 26 April 2019 19:36

Member · 307 comments

"- You have to enable "Timer" with a value of 0.8 or lower. This prevents unnessecary Move flags which could fuck the VClip." you can put your own "Timer" on your script tho : "mc.timer.timerSpeed = 0.8" (0.8 or lower)
Note that you should add "mc.timer.timerSpeed = 1.0" when disabling the menu to avoid staying with 0.8 (or lower) timer

Last edited by yorik100 (26 April 2019 19:37)

Avatar

By icewormy3 27 April 2019 14:40

Member · 787 comments

it works on blocksmc for some reason

Avatar

By icewormy3 28 April 2019 03:25

Member · 787 comments

Lol senk ju deleted the src leak XD

Avatar

By Sms_Gamer_3808 28 April 2019 04:01

Member · 594 comments
icewormy3 wrote

Lol senk ju deleted the src leak XD

aw


I don't exist

Avatar

By Virus 28 April 2019 12:04

Member · 316 comments
Sms_Gamer wrote
icewormy3 wrote

Lol senk ju deleted the src leak XD

aw

I still have it link :fv

Avatar

By icewormy3 28 April 2019 12:11

Member · 787 comments
Survi_G wrote
Sms_Gamer wrote
icewormy3 wrote

Lol senk ju deleted the src leak XD

aw

I still have it link :fv

he deleted because rule #3 says: No leaking, doxing, ddosing, etc.

Avatar

By Nvaros 28 April 2019 16:00

Member · 23 comments
yorik100 wrote

"- You have to enable "Timer" with a value of 0.8 or lower. This prevents unnessecary Move flags which could fuck the VClip." you can put your own "Timer" on your script tho : "mc.timer.timerSpeed = 0.8" (0.8 or lower)
Note that you should add "mc.timer.timerSpeed = 1.0" when disabling the menu to avoid staying with 0.8 (or lower) timer

Will be changed in the next version.
EDIT: V1.1 released

Last edited by Nvaros (28 April 2019 19:06)

Avatar

By yorik100 29 April 2019 21:44

Member · 307 comments

Quality content, now imagine if AAC was a viable anticheat and wasn't false positiving so much, would be pretty nice since much more servers would use it

Avatar

By je5442804 30 April 2019 12:41

Member · 51 comments

Your script really nice!

Avatar

By Nvaros 1 May 2019 11:08

Member · 23 comments

Note: Phase and TP have been improved a bit.

Last edited by Nvaros (1 May 2019 11:09)

Avatar

By je5442804 2 May 2019 02:13

Member · 51 comments

but i find that the v1.1 script AACTP is better?

Avatar

By Nvaros 13 May 2019 18:09

Member · 23 comments
je5442804 wrote

but i find that the v1.1 script AACTP is better?

Phase was a bit buggy in that version, therefore it has been updated.

Avatar

By E404NNF 28 May 2019 22:48

Member · 30 comments

Look, I'm very happy cuz you are the first person to do a Blocksmc bypass CONGRATULATIONS

i don't understand how to teleport lol

Last edited by E404NNF (29 May 2019 02:27)


Like where is Liquidbounce 1.13 and 1.14?

Avatar

By KokosLxrd 30 May 2019 13:21

Member · 92 comments
Manaita_C06U5 wrote

Look, I'm very happy cuz you are the first person to do a Blocksmc bypass CONGRATULATIONS

i don't understand how to teleport lol

when all made on shift click


Russian Cubecraft - cheater group.

Avatar

By yorik100 30 May 2019 15:44

Member · 307 comments

When using .aacvclip or .aachclip you crash if you don't specify the amount
Doesn't disable Freecam if disabling manually aactp

Last edited by yorik100 (30 May 2019 15:50)

Avatar

By KokosLxrd 2 June 2019 03:03

Member · 92 comments
yorik100 wrote

When using .aacvclip or .aachclip you crash if you don't specify the amount
Doesn't disable Freecam if disabling manually aactp


YES


Russian Cubecraft - cheater group.

Avatar

By Nvaros 2 June 2019 17:57

Member · 23 comments
yorik100 wrote

When using .aacvclip or .aachclip you crash if you don't specify the amount

Cannot be fixed yet.

yorik100 wrote

Doesn't disable Freecam if disabling manually aactp

Has been added.

Avatar

By CzechHek 2 June 2019 20:30

Member · 314 comments
Nvaros wrote
yorik100 wrote

When using .aacvclip or .aachclip you crash if you don't specify the amount

Cannot be fixed yet.

What about checking if the input == null or 0 and ignoring it?


ScriptAPI Developer.
Experienced YouTuber.
Discord: v.ht/DYSKORD
YouTube: v.ht/CzechHek

Avatar

By scorpion3013 2 June 2019 20:53

Donator · 170 comments
Nvaros wrote

I am aware of the crash which occurs if you use the script commands without any arguments. However, this cannot be fixed yet due to the way Liquidscript deals with these arguments.

That can be fixed...
Look at my "old" hotbar script as an example. (https://forum.ccbluex.net/thread.php?id=941)

Last edited by scorpion3013 (2 June 2019 20:53)


x9NRB1x.gif

Good paid alt-gen: The Altening
Discord: scorpion#3013 | Twitter: scorpien3013 | Keybase: scorpion3013 | Telegram: scorpion3013

Ms0EFcQ.gif

Avatar

By Nvaros 3 June 2019 00:06

Member · 23 comments
CzechHek wrote

What about checking if the input == null or 0 and ignoring it?

Doing so does not prevent the game from crashing. However, the way scorp showed does it,

Avatar

By Nvaros 16 June 2019 12:43

Member · 23 comments

A second teleport mode has been added in case the default one doesn't seem to work (the script still only works for 3.6.4 tho).

Avatar

By Nvaros 27 June 2019 22:16

Member · 23 comments

Teleport and HClip have been improved.